configs/home/.zsh/plugins/fast-syntax-highlighting/→chroma/-awk.ch

109 lines
4.8 KiB
Bash
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# -*- mode: sh; sh-indentation: 4; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# Copyright (c) 2018 Sebastian Gniazdowski
#
# $1 - 0 or 1, denoting if it's first call to the chroma, or following one
#
# $2 - the current token, also accessible by $__arg from the above scope -
# basically a private copy of $__arg; the token can be eg.: "grep"
#
# $3 - a private copy of $_start_pos, i.e. the position of the token in the
# command line buffer, used to add region_highlight entry (see man),
# because Zsh colorizes by *ranges* in command line buffer
#
# $4 - a private copy of $_end_pos from the above scope
#
(( next_word = 2 | 8192 ))
local __first_call="$1" __wrd="$2" __start_pos="$3" __end_pos="$4"
local __style __chars __val __style2
integer __idx1 __idx2
# First call, i.e. command starts, i.e. "grep" token etc.
(( __first_call )) && {
FAST_HIGHLIGHT[chroma-awk-counter]=0
FAST_HIGHLIGHT[chroma-awk-f-seen]=0
return 1
} || {
# Following call, i.e. not the first one.
if (( in_redirection > 0 || this_word & 128 )) || [[ $__wrd == "<<<" ]]; then
return 1
fi
# Check if chroma should end test if token is of type
# "starts new command", if so pass-through chroma ends
[[ "$__arg_type" = 3 ]] && return 2
if [[ "$__wrd" = -* ]]; then
# Detected option, add style for it.
[[ "$__wrd" = --* ]] && __style=${FAST_THEME_NAME}double-hyphen-option || \
__style=${FAST_THEME_NAME}single-hyphen-option
[[ "$__wrd" = "-f" ]] && FAST_HIGHLIGHT[chroma-awk-f-seen]=1
else
# Count non-option tokens.
(( FAST_HIGHLIGHT[chroma-awk-counter] += 1, __idx1 = FAST_HIGHLIGHT[chroma-awk-counter] ))
# First non-option token is the pattern (regex), we will
# highlight it.
if (( FAST_HIGHLIGHT[chroma-awk-counter] == 1 && FAST_HIGHLIGHT[chroma-awk-f-seen] == 0 )); then
if print -r -- "${(Q)__wrd}" | gawk --source 'BEGIN { exit } END { exit 0 }' -f - >/dev/null 2>&1; then
__style2="${FAST_THEME_NAME}subtle-bg"
else
__style2="${FAST_THEME_NAME}incorrect-subtle"
fi
(( __start=__start_pos-${#PREBUFFER}, __end=__end_pos-${#PREBUFFER}, __start >= 0 )) && \
reply+=("$__start $__end ${FAST_HIGHLIGHT_STYLES[$__style2]}")
# Highlight keywords
FSH_LIST=()
: "${__wrd//(#m)(BEGIN|END|FIELDWIDTHS|RS|ARGC|ARGV|ENVIRON|NF|NR|IGNORECASE|FILENAME|if|then|else|while|toupper|tolower|function|print|sub)/$(( fsh_sy_h_append($MBEGIN, $MEND) ))}";
for __val in "${FSH_LIST[@]}" ; do
[[ ${__wrd[${__val%%;;*}]} = [a-zA-Z0-9_] || ${__wrd[${__val##*;;}+1]} = [a-zA-Z0-9_] ]] && continue
__idx1=$(( __start_pos + ${__val%%;;*} ))
__idx2=__idx1+${__val##*;;}-${__val%%;;*}+1
(( __start=__idx1-${#PREBUFFER}, __end=__idx2-${#PREBUFFER}-1, __start >= 0 )) && \
reply+=("$__start $__end ${FAST_HIGHLIGHT_STYLES[${FAST_THEME_NAME}reserved-word]},${FAST_HIGHLIGHT_STYLES[$__style2]}")
done
# Highlight regex characters
__chars="*+\\)(\{\}[]^"
__idx1=__start_pos
__idx2=__start_pos
while [[ "$__wrd" = (#b)[^$__chars]#([\\][\\])#((+|\*|\[|\]|\)|\(|\^|\}|\{)|[\\](+|\*|\[|\]|\)|\(|\^|\{|\}))(*) ]]; do
if [[ -n "${match[3]}" ]]; then
__idx1+=${mbegin[3]}-1
__idx2=__idx1+${mend[3]}-${mbegin[3]}+1
(( __start=__idx1-${#PREBUFFER}, __end=__idx2-${#PREBUFFER}, __start >= 0 )) && \
reply+=("$__start $__end ${FAST_HIGHLIGHT_STYLES[${FAST_THEME_NAME}mathnum]},${FAST_HIGHLIGHT_STYLES[$__style2]}")
__idx1=__idx2
else
__idx1+=${mbegin[5]}-1
fi
__wrd="${match[5]}"
done
elif (( FAST_HIGHLIGHT[chroma-awk-counter] >= 2 || FAST_HIGHLIGHT[chroma-awk-f-seen] == 1 )); then
FAST_HIGHLIGHT[chroma-awk-f-seen]=0
# Handle paths, etc. normally - just pass-through to the big
# highlighter (the main FSH highlighter, used before chromas).
return 1
fi
fi
}
# Add region_highlight entry (via `reply' array).
#
# This is a common place of adding such entry, but any above
# code can do it itself (and it does) and skip setting __style
# to disable this code.
[[ -n "$__style" ]] && (( __start=__start_pos-${#PREBUFFER}, __end=__end_pos-${#PREBUFFER}, __start >= 0 )) && reply+=("$__start $__end ${FAST_HIGHLIGHT_STYLES[$__style]}")
# We aren't passing-through (no return 1 occured), do obligatory things ourselves.
(( this_word = next_word ))
_start_pos=$_end_pos
return 0
# vim:ft=zsh:et:sw=4